Car Wash - Primus 1+1

Panelling
Appealingly designed plastic panelling from coloured special plastic. Straight lined surfaces simplify unit maintenance. Individual colour selection from the wide array of colours are possible.

Side cylinder system
Electronically controlled wash cylinders guarantee even and gentle detection of every auto body form. Vehicle surfaces are washed in one forward and one return cycle, during which the brush direction is automatically changed. The standard wash cylinders are trimmed with bristles made from polyethylene.

Drying system
Airflow produced by 4 blowing motors. Rigid jet emissions for the side surfaces.

The complete roof drying device is pivoted at the front and the rear of the vehicle at a 30° angle, ensuring that the air stream is most effectively used.

SPC Control
Space-savingly integrated in the rollover unit's portal sidebeam. Modular construction with individual plug-in cards. Fine control of all unit functions, monitoring of the most important components by means of the integrated diagnosis system. The respective unit status is displayed in the service terminal in clear text.

Frequency control
Three frequency converters work to ensure that the traction and lifting drives run variably and smoothly.

Wash agent dosing
Wash agent supply of shampoo and drying aid is integrated user-friendly in the portal sidebeam. Single dosing pumps with variable lifting and frequency settings ensure exact wash agent dosage. The product containers are serially equipped with a fill level monitor.

Dry-running protection is also serially included in the basic model.

Portal frame
The basic model is completely galvanized and painted. Important unit parts are made from refined steel, aluminium and plastic for a long machine life.

Service terminal, Cased version A
For wall installation with plastic overlaid keypad, large clear text display, start button and emergency-off button. Capable of executing multiple functions for program input, counter request and parameter setting.

Foam device
Tough dirt is removed from the vehicle before the vehicle wash. Basis for a gentle vehicle cleaning.

Wheel rim spray device
Dirt in the rims is effectively dissolved during the wheel wash. Basis for an intensive, subsequent wheel and rim wash.

Wheel wash system
Stabile linear guidance of the internally irrigated wheel wash brushes. High cleaning performance through pulsating brush contact and change of rotation direction. Wheel detection by means of photocells.

Side high-pressure (85 bar / 16 bar)
With this upgrade, the vehicle's side areas are pre-cleaned by 2, 6 or 12 high-pressure jets. Dirt particles on the vehicle's body are powerfully removed, either with a working pressure of 85 or 16 bar.

All-around high-pressure (85 bar / 16 bar)
The entire vehicle is pre-cleaned in one or in two overruns, either with a working pressure of 85 or 16 bar. The horizontal jets are contour-followingly guided over the vehicle. In the front and rear at 30° pivotted angle.

Underbody wash unit (85 bar / 16 bar)
A mobile 85 bar rotational washer with vehicle length measurement and two 16 bar middle-pressure underbody wash systems. Each available in either above level or ground level design.

Pump cabinet with storage tank
Plastic cabinet in space-saving construction with attached storage tank. Integrated water mains separation for either fresh or recycled water feed. Two built in high-pressure pumps each with 85 bar pressure. For further water feed to the underbody washer and high-pressure pre-wash in the rollover wash unit.

Jointed brush device
The patented jointed brush device has proven true for over 15 years.

The jointed brushes are visibly perceived by the wash customer and are suitable for all vehicle forms. Due to their angled form, the brushes are optimally able to adapt to each vehicle's side surfaces. Gentle cleaning is ensured by evenly applied pressure of the corresponding wash material. The upper and lower dirtied areas are washed twice. The jointed brush device provides the best foundation for washing with the new, gentle wash materials SENSOFIL and SENSOTEX.

Wash material SENSOFIL+
Wash material made from foamed polyethylene. The following characteristics describe this gentle wash material:

• Increased longevity
• High cleaning performance
• Minimal material abrasion
• High vehicle gloss finish

Especially qualified for washing new vehicles.

Wash material SENSOTEX+
The following characteristics describe this gentle wash material:

• Increased longevity
• High cleaning performance
• Minimal material abrasion
• Highest vehicle gloss finish
• May be advertised as "Textile Car Wash"

Especially qualified for washing new vehicles.

Conservation system
The vehicle surface is efficiently preserved and vehicle gloss is increased. Hot wax or special wax device can also be alternatively selected.

Moving program display
Catches wash customers attention. Display of operation pointers for the selected program including program steps and break filler texts.

The modern LED technique is distinguished by it's long durability and powerful shining ability.

LED Positioning device
A clear, understandable indication of the pointers FORWARD, STOP, BACKWARD simplifies driving into the start position. Control succeeds over photocells during the entrance.

Illuminated wheel guiding tubes
Wheel guiding tubes assist vehicles in entering straight into the wash hall. The LED-light function alertly guides the driver safely in front of the wash unit.

Ticket terminal C-CAT
Table device for the cashier's room. Simple ticket generation through wash program input as well as integrated shift settling. Program release succeeds over the wash unit's service terminal by means of number input. Data line for rollover wash unit for the usage of further functions can be additionally selected.

Service terminal, Cased version B
This enlargened casing can be upgraded with an additional magnet card rearder or coin acceptor in addition to its standard functions.

Operator instructions on the display explain the operation steps.