Inclined side cylinders for an optimised rear wash
Roll-Over Systems with MAXI FLEX+ set new standards for rear wash cycles. The MAXI FLEX+ system allows the two side cylinders to be inclined by up to 25°, the largest inclination available on the market. The only way to ensure that the rear of the vehicle, rear spoilers and vehicles with a dynamic design and inclined rear windows are washed comprehensively is by employing this significantly larger brushing angle. The side cylinders positioned at the front of the GENIUS and PRIMUS models ensure that the rear of the vehicle is washed beyond the centre point, even if they are inclined backwards. This means that even difficult areas such as number plate indentations and recesses in the bumper can be reached in an optimum fashion, ensuring a much-improved washing result.
MAXI FLEX+ can also be combined with the jointed brush. As a result, the inclination in the rear area flawlessly joins the lateral wash with jointed brushes covering the whole of the vehicle‘s sides. If the vehicle has a hatchback-style rear end (e.g. vans), the side cylinders remain locked in the vertical position. Available for a maximum clearance height of 2,400 mm.
- Suitable for all vehicle shapes
- Maximum side cylinder inclination of 25°
- Comprehensive centre cross-over wash eliminating all wash shadows
- Optimum washing result in the rear area
Available for: | LEANUS | SIRIUS | CENTUS | VARIUS | GENIUS | AQUATUS | PRIMUS | QUANTUS | VARIUS 1+1 | VARIUS TAKT